BLACK PLASTIC
Description
The PLASTICA system consists of rigid modular components with a black finish. The components are made of polypropylene and their thickness varies depending on the diameter. The components feature a male-female socket joint with a triple-lip seal seat. The system is certified to withstand acid condensates and must be installed in systems (condensing gas or diesel boilers) with a maximum operating temperature of up to 120°C. IT IS SENSITIVE TO UV RAYS AND FROST.
Applications
- Flue pipe
- Plastic flue duct
- For the extraction of condensed damp flue gases
- Under positive or negative pressure, from condensing boilers and/or cooker hoods.
Fuels and product use suitable for
Application of the product
Available diameters
60 - 80 -100 - 125 - 160 - 200Gaskets
Included and fitted from D.80 to D.200.Designation of the product
Product marking in accordance with European standards: CE 0476 EN 14471.
D.O.P Certification
not available
Use and Maintenance
not available
Sheet
not available
BLACK PLASTIC
Description of the product
A: PPS, Black
B: Thickness: D.60 2 mm – D.80 2 mm – D.100 2.4 mm – D.125 2.7 mm – D.160 3.2 mm – D.200 4.0 mm
C: MAX 120°C (Condensation)
D: EPDM silicone seal (-90 to +200°C)
Use with gasket
EN 14471: T120 – P1 – W – 2 – O00 LI E U
EN 14471: T120 – H1 – W – 2 – O00 LI E U
CHIMNEY SYSTEM EN 1856/1: REFERENCE STANDARD
T120: Temperature class (120°C)
P1 / H1: Pressure class (P1: 200 Pa) (H1: 5000 Pa)
W: Resistance to and sealing against condensation (W: Humid)
2: Corrosion resistance (Yes)
O: Resistance to soot fire (O: no – G: yes)
(00): Distance from combustible materials (0 mm)
LI: Installation (indoor use only)
E: Reaction to fire (Low reaction to flame)
U: Protection (no protection)
